TM 9-2320-302-34
0076 00-1
FRONT STEERING ARM REPLACEMENT
0076 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Multiplier, torque wrench (Item 79, WP 0126 00)
Wrench, torque, 100-600 lb-ft (Item 140, WP
0126 00)
Wrench set, socket, 3/4 in drive (Item 141, WP
0126 00)
Materials/Parts
Pin, cotter (P/N MS24665-357)
Equipment Condition
Drag link removed (TM 9-2320-302-20)
Front brake spider and brake chamber bracket
removed (TM 9-2320-302-20)
REMOVAL
Remove cotter pin (1), castellated nut (2), steering arm (3), and woodruff key (4). Discard cotter pin.
INSTALLATION
1.
Install woodruff key (4), steering arm (3), and castellated nut (2). Tighten nut to 775-1050 lb-ft (1051-1424 Nm).
CAUTION
Castellated nut may be tightened to 1450 lb-ft (1966 Nm) for purpose of installing cotter pin. Overtightening
may damage steering arm.
2.
Install new cotter pin (1).
3.
Install drag link (TM 9-2320-302-20).
3
4
1
2
