TM 9-2320-302-34
0068 00-3
AIR CONDITIONER BINARY SWITCH WIRING HARNESS REPLACEMENT - CONTINUED
0068 00
INSTALLATION
1.
Connect wiring harness connector (6) to binary switch (7) on receiver-drier (5).
2.
Route one branch of wiring harness (4) to compressor (8), installing new tiedown straps in same place as removed.
3.
Connect wiring harness connector (9) to compressor wiring harness connector (10).
4.
Install grommet on branch of wiring harness (4) leading to circuit breaker panel (3) inside cab. Route harness through
firewall to circuit 98A on circuit breaker panel.
5.
Install grommet into firewall and secure wiring harness (4) by installing new tiedown straps in same place as removed.
6.
Connect wiring harness connector to circuit 98A on circuit breaker panel (3).
7.
Install fuse, relay, and circuit breaker panel (TM 9-2320-302-20).
8.
Install access panel (2) and lock three fasteners (1) by turning clockwise.
9.
Connect battery cables (TM 9-2320-302-20).
END OF WORK PACKAGE
1
2
3
