TM 9-2320-302-34
0060 00-1
TURN SIGNAL (THRU-DECK) WIRING HARNESS REPLACEMENT
0060 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general support (Item 132, WP 0126 00)
Materials/Parts
Straps, tiedown (Item 34, WP 0125 00)
Equipment Condition
Battery cables disconnected (TM 9-2320-302-20)
NOTE
Procedure is same for left- and right-side harnesses.
REMOVAL
NOTE
Wiring harness and leads are secured by clips, tiedown straps, cushion clamps, and screw terminals. Only
remove hardware securing harness or lead to be removed.
Disconnect and remove turn signal (thru-deck) wiring harness, using illustration as a guide. Discard tiedown straps.
INSTALLATION
NOTE
Wiring harness and leads are secured by clips, new tiedown straps, cushion clamps, and screw terminals.
Ensure harness is secure and all hardware is tight.
1.
Install, connect, and secure turn signal (thru-deck) wiring harness, using illustration as a guide.
2.
Connect battery cables (TM 9-2320-302-20).
