TM 9-2320-302-34
0059 00-1
TURN SIGNAL/MARKER LIGHT WIRING HARNESS REPLACEMENT
0059 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Materials/Parts
Straps, tiedown (Item 34, WP 0125 00)
Equipment Condition
Battery cables disconnected (TM 9-2320-302-20)
NOTE
Procedure is same for left- and right-side harnesses.
REMOVAL
NOTE
Wiring harness and leads are secured by clips, tiedown straps, cushion clamps, and screw terminals. Only
remove hardware securing harness or lead to be removed.
Disconnect and remove turn signal/marker light wiring harness, using illustration as a guide. Discard tiedown straps.
INSTALLATION
NOTE
Wiring harness and leads are secured by clips, new tiedown straps, cushion clamps, and screw terminals.
Ensure harness is secure and all hardware is tight.
1.
Install, connect, and secure turn signal/marker light wiring harness, using illustration as a guide.
2.
Connect battery cables (TM 9-2320-302-20).
