TM 9-2320-302-34
0033 00-15
CRANKSHAFT REPLACEMENT - CONTINUED
0033 00
INSTALLATION - CONTINUED
NOTE
Ensure woodruff key is fully seated and is parallel to crankshaft surface.
17.
Install woodruff key (9) in keyway. Tap key with plastic mallet or brass hammer to seat it.
18.
Index keyway of timing wheel (8) with woodruff key (9) in crankshaft (14). Slide timing wheel onto crankshaft, with
word “out” on timing wheel (8) facing you. Slide timing wheel on as far as it will go by hand.
19.
Coat bore of crankshaft timing gear (4) with a film of lubriplate. Index keyway of crankshaft timing gear (4) with wood-
druff key (9). Tap crankshaft timing gear with plastic hammer or fiber mallet to ensure woodruff key is started in key-
way.
20.
Install three crankshaft gear inserter/remover legs (3) in threaded holes in crankshaft timing gear (4). Tighten three
inserter/remover legs.
21.
Install crankshaft gear inserter/remover pressure plate (6) on three inserter/remover legs (3). Seat inserter/remover pres-
sure plate against inserter/remover leg flanges.
22.
Install three crankshaft gear inserter/remover retaining nuts (7) on inserter/remover legs (3). Thread retaining nuts past
first set of inserter/remover leg threads. Slide retaining nuts past unthreaded portion of shafts and engage second set of
threads. Tighten retaining nuts.
9
14
8
4
4
3
6
7
