TM 9-2320-302-34
0033 00-1
CRANKSHAFT REPLACEMENT
0033 00
THIS WORK PACKAGE COVERS
Removal, Cleaning, Inspection, Installation
INITIAL SETUP
Maintenance Level
General Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Dial indicator set (Item 29, WP 0126 00)
Inserter and remover (Item 52, WP 0126 00)
Pump, hydraulic ram (Item 98, WP 0126 00)
Wrench, torque, 15-75 lb-ft (Item 138, WP 0126 00)
Wrench, torque, 50-250 lb-ft (Item 139, WP 0126 00)
Wrench, torque, 100-600 lb-ft (Item 140, WP 0126 00)
Wrench set, socket, 3/4 in drive (Item 141, WP
0126 00)
Materials/Parts
Compound, international no. 2 (Item 13, WP 0125 00)
Detergent (Item 19, WP 0125 00)
Gage, bearing clearance (Item 20, WP 0125 00)
Materials/Parts - Continued
Lubriplate (Item 23, WP 0125 00)
Oil, lubricating (Item 25, WP 0125 00)
Rope, 1/2 in nylon (Item 32, WP 0125 00)
Personnel Required
Two
Equipment Condition
Flywheel housing removed (WP 0024 00)
Oil pump removed (WP 0029 00)
Pistons and cylinder assemblies removed (WP
0041 00)
Bull/idler gear removed (WP 0037 00)
Timing reference sensor (TRS) removed (TM 9-2320-
302-20)
Synchronous reference sensor (SRS) removed (TM 9-
2320-302-20)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
