TM 9-2320-302-34
0032 00-27
CYLINDER HEAD REPAIR - CONTINUED
0032 00
ASSEMBLY - CONTINUED
NOTE
Ensure all valve spring seats are in place before valve stem oil seals are installed. Install valve stem oil seal
dry.
52.
Wipe any oil from outside of valve guide (14). Install new valve stem oil seal (13) over seal protector cap (82) against
valve guide. Remove seal protector cap (82).
53.
Using valve stem seal installer, push valve stem oil seal (13) down until seal lip is fully in groove on valve guide (14).
When installer tool contacts head, seal is correctly positioned.
10
82
14
82
13