TM 9-2320-302-34
0032 00-9
CYLINDER HEAD REPAIR - CONTINUED
0032 00
DISASSEMBLY - CONTINUED
30.
Remove cup plugs by piercing with screwdriver or chisel and prying plug out of cylinder head.
31.
Unscrew pipe plugs and fuse plug.
CLEANING AND INSPECTION
1.
Steam clean stripped cylinder head.
NOTE
Ensure all cup plugs, pipe plugs, and injector tubes are installed before pressure testing cylinder head.
2.
Attach two pressure test kit strips (30) to cylinder head fire deck (20). Install 20 cylinder head bolts (31) through cylin-
der head and test kit strips. Install and tighten 20 nuts (32) to 120 lb-in (14 Nm).
29
28
2
30
32
20
31
30