TM 9-2320-302-34
0032 00-2
CYLINDER HEAD REPAIR - CONTINUED
0032 00
NOTE
Remove and replace valves, valve springs, and valve guides as a matched set. Ensured removed valves,
valve springs, and valve guides are installed in same position from which they were removed.
DISASSEMBLY
1.
Using hardware provided with material lift clamp (1), install material lift clamp on cylinder head (2).
2.
Using hardware provided with engine stand adapter plate (3), bolt plate to engine stand (4).
3.
Using bolts provided with engine stand adapter plate (3), install engine mounting bracket (5) to cylinder head (2).
4.
Using suitable lifting device, lift and mount cylinder head (2) and engine mounting bracket (5) to engine stand adapter
plate (3) by engaging slots (6) in engine mounting bracket to dowels (7) on engine stand adapter plate.
5.
Using six bolts and nuts provided with engine stand adapter plate (3), secure adapter plate and engine mounting bracket
(5) together.
6.
Remove material lift clamp (1).
7.
Position cylinder head (2) in vertical position.
8.
With legs of valve spring compressor (8) jaw on valve rotator (9) surrounding stem of valve (10), and with bottom of
spring compressor against face of valve, compress valve spring (11).
9.
Remove and discard valve keys (12).
4
6
1
2
5
3
7
