TM 9-2320-302-20
0228 00-9
GENERAL MAINTENANCE INSTRUCTIONS - CONTINUED
0228 00
MULTIMETER - CONTINUED
CAUTION
Before performing a continuity test, always turn master battery switch to OFF position and disconnect cir-
cuit to be tested. Failure to follow this caution may damage multimeter.
b.
Testing for Continuity.
(1)
Zero multimeter.
(2)
Connect black and red probes (4 and 5) to both terminals of circuit being tested.
(3)
Read digital readout (6) and interpret results as follows:
(a) If digital readout (6) indicates 0 (zero), circuit has continuity.
(b)
If digital readout (6) indicates resistance, circuit is open.
1
2
3
4
5
6
