TM 9-2320-302-20
0227 00-1
M13 DECONTAMINATION KIT MOUNTING BRACKET REPLACEMENT
0227 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Wrench, torque, 15-75 lb-ft (Item 46, WP 0236 00)
Materials/Parts
Nut, self-locking (P/N MS51922-11) (2)
References
TM 9-2320-302-10
Equipment Condition
Decontamination tank removed
REMOVAL
1.
Open door of personal gear storage box (1).
2.
Remove four self-locking nuts (2), eight washers (3), four cap screws (4), and M13 decontamination kit mounting
bracket (5) from side of personal gear storage box (1). Discard self-locking nuts.
INSTALLATION
1.
Install M13 decontamination kit mounting bracket (5) on side of personal gear storage box (1) with four cap screws (4),
eight washers (3), and four new self-locking nuts (2).
2.
Tighten four self-locking nuts (2) to 22 lb-ft (30 Nm).
3.
Close door of personal gear storage box (1).
4.
Install decontamination tank.
END OF WORK PACKAGE
4
3
1
5
3
2
