TM 9-2320-302-20
0209 00-1
SPOTTER MIRROR REPLACEMENT
0209 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Materials/Parts
Nut, lock (P/N MS51922-1) (3)
References
TM 9-2320-302-10
Personnel Required
Two
REMOVAL
1.
Remove three lock nuts (1) and washers (2) from hood liner (3). Discard lock nuts.
2.
Remove three nuts (4), washers (5), screws (6), mirror assembly (7), three spacers (8), and washers (9) from hood (10).
3.
Remove screw (11), washer (12), and spotter mirror (13) from mirror assembly (7).
INSTALLATION
NOTE
Some replacement mirrors may not have a drain hole. Drill a 1/16 inch hole at 6 o’clock position to allow
any moisture to drain.
1.
Install spotter mirror (13) on mirror assembly (17) with washer (12) and screw (11).
11
12
13
7
10
8
9
6
5
4
3
1
2
4
5
