TM 9-2320-302-20
0156 00-2
REAR QUICK-RELEASE VALVE REPLACEMENT - CONTINUED
0156 00
INSTALLATION
WARNINGS
•
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
•
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
1.
Coat threads with pipe sealing compound and install pipe nipple (12), two-way check valve (11), two connectors (10),
tees (9), and elbows (8) in quick-release valve (3).
2.
Install quick-release valve (3) with two washers (7), screws (6), washers (5), and new lock nuts (4).
3.
Connect four hoses (1) and two tubes (2) to quick-release valve (3).
4.
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
END OF WORK PACKAGE
6
7
10
11
10
2
1
2
8
9
12
3
5
4
9
8
1
