TM 9-2320-302-20
0151 00-2
REAR RELAY VALVE REPLACEMENT - CONTINUED
0151 00
INSTALLATION
1.
Install mounting bracket (14) with two washers (13), screws (12), washers (11), and new lock nuts (10).
WARNING
•
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
•
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel and damage to equip-
ment.
2.
Lightly coat pipe threads of four elbows (8) and connector (9) with pipe sealing compound.
3.
Install four elbows (8) and connector (9) on relay valve (3).
4.
Install relay valve (3) with two washers (7), screws (6), washers (5), and new lock nuts (4).
5.
Connect three tubes (1) and four hoses (2) to relay valve (3).
6.
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
END OF WORK PACKAGE
1
2
3
9
2
1
4
5
6
7
8
8
10
11
12
13
14
