TM 9-2320-302-20
0150 00-3
TRACTOR PROTECTION VALVES REPLACEMENT - CONTINUED
0150 00
FRONT TRACTOR PROTECTION VALVE INSTALLATION - CONTINUED
3.
Connect four tubes (1) to tractor protection valve (2).
4.
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
REAR TRACTOR PROTECTION VALVE INSTALLATION
1.
Install tractor protection valve (15) with two washers (19), screws (18), washers (17), and new lock nuts (16).
WARNINGS
•
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.
•
Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air
lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-
ment.
2.
Coat threads with pipe sealing compound and install four connectors (14) to tractor protection valve (15). Connect four
tubes (13).
3.
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
END OF WORK PACKAGE
3
2
12
11
8
6
4
1
1
1
5
4
7
10
9
