TM 9-2320-302-20
0119 00-18
ELECTRICAL CONNECTORS MAINTENANCE - CONTINUED
0119 00
COMMERCIAL CONNECTOR REPAIR - CONTINUED
Figure 16. Setting Wire Gage Selector and Positioning Contact.
(5)
Grasp contact approximately 1 in (2.54 mm) behind contact crimp barrel.
(6)
Hold connector with rear grommet facing you (Figure 15).
Figure 17. Pushing Contact into Grommet.
.0312 in
(0.8 mm)
.25 in (6.4 mm)
REAR VIEW OF
HOLDING GROMMET
1 in
(25.4 mm)
