TM 9-2320-302-20
0119 00-1
ELECTRICAL CONNECTORS MAINTENANCE
0119 00
THIS WORK PACKAGE COVERS
Standard Military Connector Repair, Commercial Connector Repair, Splicing
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
Gun, heat (Item 16, WP 0236 00)
Tool kit, electrical connector repair (Item 35, WP 0236
00)
Materials/Parts
Flux, soldering (Item 12, WP 0235 00)
Solder (Item 29, WP 0235 00)
Tags, marker (Item 31, WP 0235 00)
References
TB SIG 222
TM 9-2320-302-10
NOTE
Tag cables and wires to aid in installation.
STANDARD MILITARY CONNECTOR REPAIR
1.
Panel Mounting Receptacle Disassembly.
a.
Unscrew nut (1) from shell (2) assembly and slide back on cable leads (3).
b.
Push grommet (4) back on cable leads (3).
c.
Drive contacts (5) out through rear of insert (6) with pin extractor.
d.
Push insert (6) out through rear of shell (2).
e.
Unsolder cable leads (3) from contacts (5).
2.
Panel Mounting Receptacle Assembly.
a.
Strip cable insulation equal to depth of solder wells of contacts (5).
b.
Slide nut (1) over cable leads (3).
c.
Slide grommet (4) over cable leads (3).
d.
Insert cable leads (3) into solder wells of contacts (5) and solder.
e.
Push insert (6) into shell (2) from rear until seated. Groove in insert must be aligned with guide in shell to ensure
proper fit.
3
1
4
5
6
2
