TM 9-2320-302-20
0117 00-2
AUTOMATIC ETHER STARTING AID WIRING HARNESSES REPLACEMENT - CONTINUED
0117 00
MAIN WIRING HARNESS REMOVAL - CONTINUED
3.
Remove screw (6) and terminal (7) of main harness (2) from side of engine.
4.
Remove nut (8) and terminal (9) of main harness (2) from starter.
5.
Disconnect main harness connector (10) from jumper harness connector (11).
6.
Remove main harness (2) from vehicle.
JUMPER WIRING HARNESS REMOVAL
1.
Disconnect jumper harness connector (11) from main harness connector (10).
2.
Disconnect jumper harness connector (12) from ECU connector (13).
3.
Disconnect jumper harness connector (14) from ECU harness connector (15).
4.
Remove jumper harness (16) from vehicle.
MAIN WIRING HARNESS INSTALLATION
1.
Position main harness (2) on vehicle.
2.
Connect main harness connector (10) to jumper harness connector (11).
3.
Install terminal (9) of main harness (2) to starter with nut (8).
4.
Install terminal (7) of main harness (2) to side of engine with screw (6).
5.
Connect main harness connector (4) to valve harness connector (5).
7
6
8,9
15
14
16
12
13
11
10
2
