TM 9-2320-302-20
0111 00-4
COLLISION WARNING SYSTEM (CWS) MAINTENANCE - CONTINUED
0111 00
SIDE SENSOR REPLACEMENT
1.
Disconnect harness connector (14) from side sensor connector (15).
2.
Remove four screws (16) and side sensor (17) from bracket (18).
3.
Install side sensor (17) on bracket (18) with four screws (16).
4.
Connect harness connector (14) to side sensor connector (15).
5.
Perform CWS self-test (TM 9-2320-302-10).
SIDE SENSOR DISPLAY REPLACEMENT
1.
Disconnect harness connector (19) from side sensor display (20).
2.
Remove two screws (21), star washers (22), and side sensor display (20) from bracket (23).
3.
Install side sensor display (20) on bracket (23) with two star washers (22) and screws (21).
4.
Connect harness connector (19) to side sensor display (20).
5.
Perform CWS self-test (TM 9-2320-302-10).
17
16
18
14
15
