TM 9-2320-302-20
0089 00-1
CLEARANCE LIGHT REPLACEMENT
0089 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Tool kit, general mechanic’s (Item 36, WP 0236 00)
References
TM 9-2320-302-10
Equipment Condition
Head liners removed (WP 0203 00)
NOTE
Five clearance lights are replaced the same way. One clearance light is shown.
REMOVAL
1.
Remove lens cover (1), lamp (2), two screws (3), and washers (4) from clearance light (5).
2.
Remove clearance light (5).
3.
Disconnect connector (6) and pull harness (7) through hole in cab (8).
4.
Remove grommet (9) from cab (8).
INSTALLATION
1.
Install grommet (9) on cab (8).
2.
Feed harness (7) through hole in cab (8).
3.
Connect connector (6).
4.
Install clearance light (5), two washers (4), screws (3), lamp (2), and lens cover (1).
5.
Install head liners (WP 0203 00).
END OF WORK PACKAGE
1
2
5
9
7
6
8
4
3
