TM 9-2320-302-20
0029 00-3
AIR COMPRESSOR REPLACEMENT - CONTINUED
0029 00
REMOVAL - CONTINUED
INSTALLATION
WARNING
•
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If
adhesive or sealing compound contacts skin or clothing, wash immediately with soap and water.
•
Ensure that all airlines and fittings are free of debris and excess pipe sealing compound does not enter
airlines or fittings. Failure to follow this warning could result in injury to personnel and damage to
equipment.
1.
Lightly coat pipe threads of elbows (5, 7, 10, and 14) with pipe sealing compound. Install elbows on air compressor
(19).
2.
Install new gasket (27) and pipe flange (3) on air compressor (19) with two new lock washers (26) and bolts (25).
Torque bolts to 156-204 lb-in (18-23 Nm).
3.
Apply a light coat of grease to bolt hole locations on new gasket (24). Install gasket on air compressor (19).
25
26
3
27
5
10
7
19
14
