TM 9-2320-302-10
0005 00-2
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
INITIAL ADJUSTMENTS, DAILY CHECKS, AND SELF-TESTS - CONTINUED
WARNING
Use of seat belts while operating vehicle is mandatory. Fasten belt BEFORE
driving. Trying to fasten three-point seat belt while driving creates a hazard-
ous condition. Failure to follow this warning may result in death or injury to
personnel.
8.
Adjust tether belt.
a.
Loosen tether belt (6) and turn buckle (5) at a right angle to webbing. Pull buckle
away from inner webbing.
b.
Tighten tether belt (6) to proper tension. Ensure that movement of seat suspension is
not restricted.
9.
Fasten seat belt.
a.
Slowly pull link (9) out of retractor (10) and across lap far enough to engage buckle
(5). If retractor locks too soon, allow belt to retract slightly and then pull slowly.
b.
Push link (9) into buckle (5).
c.
Position shoulder strap (8) diagonally across chest.
5
9
7
8
6
10
