TM 9-2320-302-10
0014 00-3
WHEEL AND TIRE MAINTENANCE INSTRUCTIONS - CONTINUED
0014 00
OPERATION OF SPARE WHEEL AND TIRE ASSEMBLY CARRIER - CONTINUED
WARNING
Use caution when lifting or handling wheel and tire assembly. It is heavy and
could cause injury if improperly lifted or if it falls on you.
d.
Slowly rotate gear shaft (1) counterclockwise one notch.
e.
Support spare wheel and tire assembly (5) and remove wheel clamp plate (6).
f.
Repeat steps c. and d. until spare wheel and tire assembly (5) is lowered to ground.
g.
Remove two nuts (4).
2.
Install Spare Wheel and Tire Assembly on Carrier.
a.
Secure hoist cable (3) by inserting wheel clamp plate (6) through wheel opening.
b.
Turn gear shaft (1) clockwise until spare wheel and tire assembly (5) is raised to
stowed position.
c.
Engage pawl (2) on gear shaft (1).
d.
Install two nuts (4).
WHEEL AND TIRE ASSEMBLY REPLACEMENT
NOTE
When changing tires, DO NOT substitute type or size tire unless all tires on
the vehicle can be converted. Keep all tires the same size and type.
1
2
4
4
3
5
6
