WHEEL AND TIRE MAINTENANCE (cont)

OPERATION OF SPARE WHEEL AND TIRE ASSEMBLY CARRIER

TM-9-2320-302-10 Truck Tractor Line Haul 60 000 GVWR 6x4 M910A1 Manual
Page Navigation
154

TM 9-2320-302-10 0014 00-2 WHEEL AND TIRE MAINTENANCE INSTRUCTIONS - CONTINUED 0014 00 WHEEL AND TIRE MAINTENANCE - CONTINUED 3. Start engine. Push in (ON) trailer air supply control valve. 4. Remove valve stem cap (4) and connect pneumatic hose (1) to valve stem (5). 5. Add air until desired pressure is reached. 6. Remove pneumatic hose (1) from valve stem (5) and install valve stem cap (4). 7. Pull out (OFF) trailer air supply control valve. Shut down engine. 8. Disconnect pneumatic hose (1) from emergency gladhand (3) and return to BII storage box. 9. Install dummy coupling (2) on emergency gladhand (3). OPERATION OF SPARE WHEEL AND TIRE ASSEMBLY CARRIER 1. Remove Spare Wheel and Tire Assembly from Carrier. a. Ensure pawl (2) engages gear shaft (1) and loosen two nuts (4). b. Slide spare wheel and tire assembly (5) to allow nuts (4) to pass through keyway opening. c. Turn gear shaft (1) clockwise slightly and disengage pawl (2). Swing pawl out of way. 4 5 2 1 3

Privacy Statement
Press Release
Contact