TM 9-2320-283-20-3
STEERING SYSTEM.
3-214. UPPER STEERING COLUMN REPLACEMENT AND REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
E. INSTALLATION.
25. Clamp (3),
Install onto item (5), just
insulator (4),
below item (30).
Make sure item (5) is
insulator (9),
positioned so that items
and clamp (10).
(8) and (19) can be
properly installed.
26. Clamp (10), steer-
a. Position on item (11).
ing column assem-
bly (5), clamp
(3),
b. Secure with six items (1)
and clamp
and (2).
Secure item (25) with
(25).
lower right-hand items
(1) and (2).
27. Yoke (13) and
steering shaft
assembly (23).
a. Line up mark on item (13)
with mark on item (23).
b. Push item (13) onto item
(23) until holes in item
(13) line up with groove
in item (23).
28. Screw (12), lock-
washer (14), and
Install in item (13) and
nut (15).
tighten.
29. Ring (32).
Lubricate brush contact
surface with a small amount
of lubricant.
30. Horn brush assem-
bly (8).
a. Position on item (5).
b. Secure with two items (7)
and (6).
3-1278
