TM 9-2320-283-20-3
STEERING SYSTEM.
3-214. UPPER STEERING COLUMN REPLACEMENT AND REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
B. DISASSEMBLY.
9. Spacer (26).
Bend out tang and remove
from item (23).
Push down on item (29)
if necessary.
10. Sleeve (27) and
Remove from item (29) and
bearing assembly
slide off of item (23).
with seal (28).
11. Bearing (34).
Remove from item (29).
12. Tube (29).
Slide off of item (23).
13. Ring (39), cage
Remove from item (23).
(38), spring
Be careful not to damage
serrated end of item
(37), washer (36),
sleeve (35), and
(23) when removing
item (39).
bearing assembly
with seal (34).
C. CLEANING AND INSPECTION.
14. All parts.
Clean and inspect.
Refer to paragraphs 3-4
and 3-5.
Remove and
replace item (30) if
damaged.
Do steps 15
thru 19 if items (32) or
(33) are damaged.
Replace item (23) if
item (31) is damaged.
15. Wire (31).
Unsolder and remove from
item (32).
Do not remove item (31)
from item (23).
16. Rivet (33).
Remove from item (32).
Discard item (33).
3-1274
