HEATER HOSES, TUBES, AND CLAMPS REPLACEMENT

HEATER VALVES, HOSES, TUBES, AND CLAMPS REPLACEMENT (Continued).

HEATER VALVES, HOSES, TUBES, AND CLAMPS REPLACEMENT (Continued) - TM-9-2320-283-20-3_557

TM-9-2320-283-20-3 Truck Utility: Cargo/Troop Carrier 1-1/4 Ton 4x4 M998 (2320-01-107-7155) (EIC: BBD);M998A1 (2320-01-371-9577) (EIC: BBN) Manual
Page Navigation
539

TM 9-2320-283-20-3 ACCESSORY ITEMS. 3-297. HEATER VALVES, HOSES, TUBES, AND CLAMPS REPLACEMENT (Continued). LOCATION/ITEM ACTION REMARKS A. HEATER HOSES, TUBES, AND CLAMPS REPLACEMENT. NOTE ^lUse standard shop maintenance prac- tices to replace heater hoses, tubes, and clamps. l For routing and location information refer to illustration. ^lFor specifications on making new heat- er hoses refer to Appendix E. B. CONTROL VALVE REMOVAL. 1. Screw (1) and clip Remove from item (4). (2). 2. Wire (3). Remove from item (4). 3. Two clamps (6). Loosen. 4. Valve (4) and two Remove from item (9) and clamps (6). item (5). C. CONTROL VALVE INSTALLATION. 5. Two clamps (6) and Install in item (5) and valve (4). item (9). 6. Valve (4). Manually turn off (counter- clockwise). 7. Heater control Push in. Refer to TM 9-2320-283- knob. 10. 8. Wire (3). Install on item (4). 9. Screw (1) and clip Secure item (3) to item (2). (4). 3-1732

Privacy Statement
Press Release
Contact