TM 9-2320-283-20-3
ACCESSORY ITEMS.
3-296. HEATER AIR HOSE REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL.
1. Two clamps (8).
Loosen.
2. Hose (6), hose (7), Remove from item (9).
and two clamps (8).
3. Three screws (2).
Loosen.
4. Panel (4).
Open.
5. Clamp (8).
Loosen.
6. Hose (6) and
Remove from flange on cab.
clamp (8).
7. Three ties (5).
Cut from items (6) and (7).
Take care not to cut
items (6) and (7).
8. Hose (6) and hose
Remove.
(7).
9. Three screws (3).
Remove from three items (1).
B. INSTALLATION.
10. Three screws (3).
Secure three items (1) to cab.
11. Hose (6) and clamp Install on flange on cab.
(8).
12. Hose (6), hose (7), Install on item (9).
and two clamps (8).
13. Three new ties
(5).
Install through three items
(1).
14. Panel (4).
Close.
15. Three screws (2).
Tighten.
NOTE
Follow-on maintenance action required:
Connect battery power (para 3-120).
3-1728
