CHECKING ALINEMENT

FRONT WHEEL ALINEMENT (Continued). - TM-9-2320-283-20-3_19

FRONT WHEEL ALINEMENT (Continued). - TM-9-2320-283-20-3_21

TM-9-2320-283-20-3 Truck Utility: Cargo/Troop Carrier 1-1/4 Ton 4x4 M998 (2320-01-107-7155) (EIC: BBD);M998A1 (2320-01-371-9577) (EIC: BBN) Manual
Page Navigation
6

TM 9-2320-283-20-3 WHEELS. 3-203. FRONT WHEEL ALINEMENT (Continued). LOCATION/ITEM ACTION REMARKS A. CHECKING ALINEMENT. 1. Gage (1). From the front of vehicle, Gage (1) should be on install between tires so both same spot of both tires. chains just touch ground. 2. Pointer (2). Set to read zero. 3. Gage (1). a. Remove. b. From behind front wheels, Gage (1) should be on install between tires so same spot of both tires. both chains just touch ground. 4. Pointer (2). Check reading. Reading should be 1/32 ± 1/32 for both wheels. If not, adjust aline- ment. B. ADJUST ALINEMENT. 5. Two bolts (3) and Loosen. nuts (4). 6. Tie rod tube a. Turn to adjust. As shown. assembly (5). b. Check alinement again. 7. Two bolts (3) and Torque between 40 and 55 nuts (4). lb-ft. NOTE Follow-on maintenance action required: None. 3-1208

Privacy Statement
Press Release
Contact