TM 9-2320-283-10
KEY TO SEAT ADJUSTMENT CONTROLS (Continued)
2
3
4
5
BACKREST ANGLE ADJUSTMENT CONTROL -
COMPANION SEAT
Backrest may, be adjusted to 3 different angle posi-
tions. Push lever down to raise backrest cushion to
desired position and release lever to lock in position.
Pull lever up to lower backrest cushion.
SEAT CUSHION TILT ADJUSTMENT CONTROL -
COMPANION SEAT
Forward edge of seat cushion may be tilted to 3
different angle positions. Push lever down to raise
forward edge of seat. Pull lever up to lower seat
cushion.
FORWARD AND BACKWARD SEAT ADJUSTMENT CONTROL - COM-
PANION AND OPERATORS SEAT
Pull out on the lever to move either seat forward or backward to adjust for in-
dividual leg length. The companion seat can be moved a total of 4 inches, while
the operators seat may be moved a total of 6 inches. Releasing the lever locks
the seat in position chosen.
RIDE LEVEL ADJUSTMENT - OPERATORS
SEAT
Use this control to adjust the torsion bar preload for
your weight. To increase preload, while seated
push ratchet trip lever up and operate the ratchet
handle in the up and down direction until the indi-
cator (item 7) is flush with the seat side frame as
shown in the inset in Figure 2-10. To lower preload,
while seated push ratchet trip lever down and oper-
ate ratchet handle in the up and down direction until
the indicator is flush with the seat side frame.
TA 236655
2-26
