TM 9-2320-283-10
Table 3-1. Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
13.
ENGINE COOLANT TEMPERATURE GAGE INDICATES ENGINE IS OVER-
HEATING (TEMPERATURE EXCEEDS 210°F).
Step 1.
Check coolant level in radiator. Sight glass should be full.
Add coolant to fill radiator to proper level (refer to Para-
graph 3-3).
Step 2.
Check for leaks in system.
If you find leaks, notify Organizational Maintenance.
Step 3.
Check to make sure radiator cooling fins are free of mud, ice, snow
or debris.
Remove any material clogging radiator. Shine flashlight
through engine side and note light at radiator. Make sure
cooling fins are not clogged.
Step 4.
Check cooling fan drive belts for looseness.
1/2 INCH OR LESS
If belts are loose,
notify Organizational Maintenance.
Step 5.
Check to make sure engine oil is at proper level on dipstick.
Add oil, if necessary (refer to paragraph 2-7).
Step 6.
Check to make sure transmission fluid is at proper level on dipstick.
Check transmission oil temperature gage (refer to paragraph 2-7).
Add fluid, if necessary.
TA 23669
3-9
