TM 9-2320-273-20
BRAKE SYSTEM.
9-10. AIR DRYER DEHYDRATE CARTRIDGE REPLACEMENT (Continued).
LOCATION/lTEM
ACTION
REMARKS
C. INSTALLATION.
6. Air dryer housing (1).
a. Lubricate O-ring (2) with
Torque to 32 Ib-ft.
silicone grease.
b. Using 3/4 inch socket wrench
screw in and tighten new
dehydrate cartridge (3).
7.
Lubricate O-ring (4) with sili-
cone grease and install in
groove.
NOTE
Assistant may be required for this step.
8.
a. Join alinement marks and
press end cover assembly (5)
up as far as it will go.
b. Secure with retaining ring (9).
9. Three retaining clips (11).
Turn outward and over the edge
of air dryer housing (1) and
tighten three screws (10).
10. Electrical terminal (14).
Install electrical wire (7), nut
(13) and insulating boot (8).
11. End cover assembly (5).
Apply antiseizing tape and
connect hose assembly (6) to
connector (12).
NOTE
Follow-on maintenance action required:
Pressurize air system and check for leaks
and proper operation.
9-28.2 Change 2