TM 9-2320-273-20
PROPELLER SHAFTS AND UNIVERSAL JOINTS.
8-11. PROPELLER SHAFTS AND UNIVERSAL JOINTS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
APPLICATION
Model
Quantity Style
Location
M915
1
A
Prop shaft from transmission to forward rear axle.
1
B
Prop shaft from forward rear axle to rear rear axle.
M916,
M917
1
B
Prop shaft from transmission to top of transfer case.
M918,
M919
1
B
Prop shaft from bottom of transfer case to front axle.
M920
1
B
Prop shaft from bottom rear of transfer case to forward rear axle.
1
A
Prop shaft from forward rear axle to rear rear axle.
NOTE
Before disassembly of any prop shafts and
U-joints, punch mark each shaft and joint
to insure proper assembly alinement. If al-
ready punch marked, do not make new marks,
but use existing ones.
NOTE
Before disassembly, use a suitable jack or
sling to support shaft. It may be necessary
to jack up rear differential with Park Brake
OFF to release torque pressure on prop
shaft/joint connections.
STYLE A
1. Four Iockplates (2).
Bend down tabs as needed.
2. Eight capscrews (1).
Unscrew and remove.
3. Four Iockplates (2).
Remove from bearing cups (3).
4. Bearing cups (3).
Remove.
5. Yokes (6) and cross (4).
a. Disengage cross from yokes.
b. Remove cross (4).
c. Swing shaft yoke free of axle
or transmission.
d. Unscrew grease fitting (5).
8-14
