TM 9-2320-273-20
TRANSMISSION.
6-14. TRANSMISSION CONTROL HEATER MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. INSTALLATION (Continued).
35. Harness (17).
a. Route along engine and
secure with four new
cable ties (18).
b. Install one wire to sending
unit (40) with screws
(39) .
36. Bracket (33).
Position at ether quick-start
37. Switch (34).
38. Harness (17).
bracket and instalI with two
bolts (29}, washers (28) and
nuts (27).
Install to bracket (33) with
two bolts (30), washers (31),
and nuts (32).
a. Install four wires to four
terminals on switch (34)
with two nuts (38), wash-
ers (37), nuts (36), and
washers (35).
b. Install one wire to fuel
pump and secure with
nut (45) and washer (44).
Left side. Install as needed to
prevent slack.
Near starter. Install as tagged
at disassembly.
Install as tagged at disassembly.
Install as tagged at disassembly.
6-50