TM 9-2320-273-20
SENDING UNITS, SWITCHING DEVICES, AND WINTERIZATION KIT.
5-93. WINTERIZATION KIT BATTERY BOX INSULATION MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
2. Four capscrews (18), lock-
Remove and lift out four
washers (17), nuts (16),
retainers (8), and transite (6).
and screws (7).
3. Four screws (10), and two
Remove.
retainers (9),
4. Two screws (12), lock-
Remove and scrape off in-
washers (13), and brackets
sulation (11) with sharp tool
(14).
or putty knife.
B. CLEANING
5. Battery compartment.
Wash out with high pressure
water or steam and clean off
adhesive with Milsolv (19).
C. INSTALLATION
6. Adhesive (20), insulation
(1), (3), (4), (5), (11),
Apply adhesive (20) to all
Adhesive (20) supplied
insulation panels and apply
with kit.
and (15), and seal (2).
to their respective places.
7. Two brackets (14), lock-
Install.
washers (13), and screws (1 2).
8. Four screws (10), and two
Install.
retainers (9).
9. Four capscrews (18), eight
Install four retainers (8) and
Iockwashers (1 7), and nuts
(16), four retainers (8), four
transite (6) and secure with
four capscrews (8) and screws
transites (6), and screws (7).
(7).
5-352
