TM 9-2320-273-20
SENDING UNITS, SWITCHING DEVICES, AND WINTERIZATION KIT.
5-92. WINTERIZATION KIT BATTERY BOX THERMOSTAT AND TERMINAL STRIP
MAINTENANANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
4. Cover (21).
Remove two hex nuts (23), lock-
washers (22), and screws (14).
5. Terminal strip (20).
a. Remove wire assembly (2).
Tag terminals to aid in
b. Remove two hex nuts (24),
reassembly.
Iockwashers (25) and screws
(13).
6. Two cable grips (9) and (10).
Remove two conduit nuts (26).
and reducing washers (27).
7. Two grommets (15).
Remove.
8. Insulation (28).
Remove with sharp tool or
Milsolv (8) supplied
putty knife and clean off
with kit.
adhesive with Milsolv (8).
B. INSTALLATION
9. Insulation (28).
a. Install adhesive (32) to
Adhesive (32) supplied
rear cover (16).
with kit.
b. Put insulation (28) in place.
10. Two grommets (15).
Install.
11. Two cable grips (9) and (10).
Install into rear cover and
secure with two reducing
washers (27) and conduit
nuts (26).
12. Terminal strip (20).
a. Install and secure with two
screws (13), Iockwashers
(25) and screws (13).
b. Install wire assembly (2).
13. Cover (21).
Install and secure with two
hex nuts (23), Iockwashers
(22), and screws (14).
5-346
