TM 9-2320-273-20
EXTERIOR LIGHTING.
5-52. STATIONARY WORK LAMP REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
1. Wire (2).
Cut and remove connectors.
2. Hex nut (5) and
Remove.
Iockwasher (4).
3. Cone spacer (3).
Remove.
4. Lamp assembly (1).
Remove.
B.
INSTALLATION.
5. Lamp assembly (1).
Install.
6. Cone spacer (3), hex nut (5)
Install. Tighten nut.
and Iockwasher (4).
7. Wire (2).
Reconnect, using suitable
electrical connectors.
C. OPERATIONAL CHECK.
8. WORK LAMP switch.
Place switch in
Check to see that
ON position.
lamp is lit.
5-177
