TM 9-2320-273-20
EXTERIOR LIGHTING.
5-51. STATIONARY WORK LAMP BULB REPLACEMENT (Continued).
LOCATION/lTEM
ACTION
REMARKS
NOTE
Prior to the removal of the bulb make cer-
tain that the work lamp switch is in the
OFF position.
1.
2.
3.
4.
Machine screw (2) and hex
nut (3).
Retainer ring (1).
Two screws (4).
Bulb (5).
Remove.
Remove.
Loosen and remove wires
(6).
Remove.
B.
INSTALLATION.
5.
6.
7.
8.
Bulb (5).
Two screws (4).
Retainer ring (1).
Machine screw (2) and hex
nut.(3).
C. OPERATIONAL CHECK.
9. Work lamp switch.
Hold in position and
install wires (6).
Tighten.
Install.
Install and tighten.
Place switch in ON
position.
Check to see that lamp is lit.
5-174