TM 9-2320-273-20
BATTERIES AND ALTERNATOR
5-38. BATTERY MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
E. INSTALLATION.
13. Four batteries (10).
Set batteries in box as shown.
14. Battery bracket (7).
Set in place.
15. Five bolts (13), washers
Install and tighten.
(14), and hex nuts (15).
16. Ten cables (8) and (9).
17. Eight hex nuts (4).
18. Battery box cover
latches (3).
Always check to make sure that the
batteries are connected as shown in the
illustration (series-parallel). Failure to
connect batteries correctly can result
in severe damage to the trucks electrical
system.
Connect to batteries as shown.
Replace and tighten.
Install cover (1) and fasten latches.
NOTE
Follow-on maintenance action required:
a. Check operation; refer to TM 9-2320-273-10.
5-122