TM 9-2320-273-20
5-6. TEST EQUIPMENT (Continued).
b. Using the Ohms Seale. The Ohms Scale (fig. 5-2 thru fig, 5-4) is used to make tests for
continuity, shorts, and resistance. The multi meter must be set up and zeroed before making
these tests. Do the following steps that match the multi meter you have:
Figure 5-2. Using the Ohms Scale and Zeroing Multimeter AN/URM-105
NOTE
If needle will not zero, replace the batteries.
If the needle still will not zero after replac-
ing the batteries, turn the meter in for repair.
TA 074691
5-5