TM 9-2320-273-20
COOLING SYSTEM.
4-40. RADIATOR MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. INSTALLATION (Continued).
12. Two washers (11) and
Install and tighten.
nuts (10).
13. Air filter inlet tube (21).
a. If removed, reinsert at
filter end and tighten
forward clamp,
b. Slide boot (20) onto air
inlet and tighten two
clamps (19).
14. Three hose clamps
Reinstall inlet hose (3)
(1), (2) and (16).
pump aeration hose (18)
and outlet hose (17) to
radiator. Position clamps
and tighten.
15. Radiator aeration
Apply liquid teflon to
hose (9).
fitting and screw into
connector.
NOTE
Follow-on maintenance actions required:
a. Install steering pump cooler hoses, para 10-22.
b. Install transmission cooler hoses, para 6-10C.
c. Install grille, para 11-16.
d. Install brush guard (M916/M920), para 11-16.
e. Fill cooling system, para 4-42C; use Artic Anti Freeze if sub zero.
f. Install hood, para 11-32C.
4-150
