TM 9-2320-273-20
COOLING SYSTEM.
4-40. RADIATOR MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
6. Two rod arms (4).
a. Remove two nuts (8) and washers
(7).
b. Remove two rod arms and attach-
ed ball studs from radiator.
c. If required, separate rods by re-
moving two nuts (24), clamp
bolts (23) and clamps (22) from
center of rod arms (4).
7. Radiator (15).
a. Tilt forward and support.
b. Remove six capscrews (6)
from fan (5) and remove
fan.
c. Lift radiator (15) enough to
If lifting device is avail-
clear insulators (13) and
able, install lifting eyes
remove.
in rod arm holes.
8. Two insulators (13).
a. Remove.
b. Throw away.
NOTE
To remove shrouds from radiator assembly
refer to paragraph 4-41. Fan Shrouds
Maintenance.
B. INSTALLATION.
9. Two new insulators (13).
Position on mounting studs
You may use tape to
(14).
hold the insulators in
place.
10. Radiator (15).
a. Aline mounting studs (14) with
support (12). Set in place.
b. Tilt forward and support.
Install six capscrews (6)
into fan (5). Torque to 25-32
Ib-ft (33.9 to 43.4 Nm).
11. Two rod arms (4).
a. If separated, install two nuts
(24), clamp bolts (23), and
clamps (22) thru center of
rod arms (4) and tighten.
b. Insert in top support bracket.
c. Install two washers (7) and
nuts (8). Tighten.
4-148
