TM 9-2320-273-20
BODY AND CAB.
11-32. HOOD MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
4.
5.
6,
7.
Fourteen capscrews
Unscrew and remove hood side
(14), washers (15)
panel (13).
and nuts (16).
Fourteen capscrews (19),
Unscrew and remove hood top
twenty-eight washers (18),
panel (1).
and fourteen nuts (17).
Four capscrews, washers,
a. Remove from pin plate (22).
and nuts (20).
b. Slide pin plate (22) from front
bracket (21).
Hood center panel (23).
Remove from rear bracket (21)
on firewall.
NOTE
Inspect hood prop safety chains, S-hooks,
and rubber grommets for damage. Replace
as necessary.
B. lNSTALLATION.
8. Hood center panel (23).
Insert pin into rear bracket (21)
on firewall.
9. Four capscrews, washers,
a. Insert pin plate (22) into front
and nuts (20).
bracket (21).
b. Install pin plate (22) to center
panel (23).
10. Hood top panel (1).
Position and secure with fourteen
capscrews (19), twenty-eight washers
(18) and fourteen nuts (17).
11. Hood side panel (13).
Position and secure with
fourteen capscrews (14),
washers (15) and nuts (16).
12. Hood brackets (7).
Position on hood side panel
(13) and secure with four
capscrews (6), washers (8)
and nuts (9).
13. Handle (2).
Position and secure with
four capscrews (3), washers
(4) and nuts (5).
11-106
