TM 9-2320-273-20
BODY AND CAB.
11-29. HEATER CONTROL VALVE MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL (Continued).
2. Screw (2).
3. Cable end (4).
4. Two clamps (9).
5. Control valve (8).
B.
INSTALLATION.
Loosen. Remove cable (1) from
clip (3).
Slide off of pin (5).
NOTE
Before removing control valve (8), place
clean container underneath to catch
spilled coolant.
Loosen.
Remove from two rubber
connectors (6).
6. Control valve (8).
7. Two clamps (9).
8. Cable (1).
9. Cable end (4).
Push into two rubber connectors
(6).
Tighten.
Place in clip (3) and tighten screw
(2).
Slide onto pin (5).
NOTE
Follow-on maintenance action required:
Bleed heater and adjust shutoff valve;
refer to paragraph 4-50C.
11-96
