TM 9-2320-273-20
BODY AND CAB.
11-14. FENDER MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
E. REMOVAL OF REAR FENDER.
34. Bolt (12) and nut (14).
a. Unscrew, loosen clamp (13), and
Mounting pin (6) used on
slide mounting tube (15) with
M916, M917, M920;
fender (19) attached, from
mounting pin plate (10)
mounting pin (6) or mounting
used on M915.
pin plate (10).
b. Slide clamp (13) off mounting
tube (15).
35. Three bolts (16) and nuts (18). Unscrew and remove mounting tube
(15).
36. Three bolts (5) and nuts (20).
Unscrew and remove with three
supports (17).
37. Six bolts (3), washers (2), and
Unscrew and remove mud guard (4).
nuts (1).
38. Bolt (7) and nut (6).
Unscrew from frame rail and
M916, M917, and M920
remove mounting pin (6).
only.
39. Four bolts (11) and nuts (9).
Unscrew from frame rail and
M915 only.
remove mounting pin plate (10).
F. INSTALLATION OF REAR FENDER.
40. Mounting pin plate (10).
a. Aline with frame rail holes.
M915 only.
b. Attach with four bolts (11)
and nuts (9).
41. Mounting pin (6).
a. Aline with frame rail hole.
M916, M917, and M920
b. Attach with bolt (7) and nut (8). only.
42. Mud guard (4).
a. Aline with mounting at top of
rear quarter fender (19).
b. Attach with six bolts (3), washers
(2), and nuts (1).
43. Three supports (17).
a. Aline with mounting holes on
rear quarter fender (19).
b. Attach with three bolts (5) and
nuts (20) at upper fender
curvature.
44. Mounting tube (15).
a. Aline with lower mounting holes
on three supports (17) and rear
quarter fender (19).
b. Attach with three bolts (16) and
nuts (18).
45. Clamp (13).
Slide over mounting tube (15).
11-42
