TM 9-2320-273-20
BODY AND CAB.
11-14. FENDER MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
A. REMOVAL OF FRONT FENDER (M915) (Continued).
5. Eight bolts (5), sixteen washers Unscrew and remove top filler
(6), and eight nuts (29).
panel (7).
6. Six bolts (36), twelve washers
Unscrew and remove forward
(35), and six nuts (28).
filler panel (12) and rear filler
panel (34).
7. Three bolts (37) and nuts (1).
Unscrew and remove fender
support (38).
8. Three bolts (4) and nuts (2).
Unscrew and remove fender
support (3).
B. INSTALLATION OF FRONT FENDER (M915).
9. Fender support (3).
install to frame rail with three
bolts (4) and nuts (2).
10. Fender support (38).
Install to frame rail with three
bolts (37) and nuts (1).
11. Forward filler panel (12) and
a. Aline with mounting holes on
rear filler panel (34).
fender (33).
b. Attach with six bolts (36),
twelve washers (35), and six
nuts (28).
12. Top filler panel (7).
a. Aline with mounting holes on
fender (33), forward filler
panel (12), and rear filler panel
(34).
b. Attach with eight bolts (5),
sixteen washers (6), and eight
nuts (29).
13. Front fender (33), two inner
a. Aline with mounting holes on
If braces (20) or (31)
stiffeners (27), one outer
fender supports (3) and (38).
were removed from
stiffener (24), mud flap (30),
b. Attach with ten bolts (22),
vehicle, reinstall with
two anti-sail braces (32), fender
washer (21), nineteen washers
one existing nut.
to bumper brace (20) and
(25) and ten nuts (26).
fender to cab support brace (31).
14. Cannon connector.
Twist onto firewall connector.
15. Latch hood.
Refer to TM 9-2320-273-10.
C. REMOVAL OF FRONT FENDER (M916 thru M920).
16. Unlatch hood.
Refer to TM 9-2320-273-10.
17. Cannon connector.
Twist and remove from firewall
connector.
11-36
