TM 9-2320-273-20
CHAPTER 11
FRAME, BODY AND CAB MAINTENANCE
11-1. OVERVIEW.
This chapter provides you with the following information related to frame, body and cab
maintenance:
a.
All required special tools and equipment.
b.
Other technical manuals.
c.
Troubleshooting procedures.
d.
Maintenance procedures.
a.
Do not drill holes in frame flanges.
b.
Do not weld frame.
Section I REPAIR PARTS, SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT
11-2. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and
Equipment (MTOE) applicable to your unit.
11-3. SPECIAL TOOLS, TMDE, SUPPORT EQUIPMENT.
The special tools, TMDE and support equipment required for the frame, body and cab maintenance
procedures described in this chapter are limited to the 1000-lb hoist and lift hook. (Refer to
Organizational Maintenance RPSTL, TM 9-2320-273-20P for tool description and illustrations.)
11-4. SPARES AND REPAIR PARTS.
Spares and repair parts are listed and illustrated in the Repair Parts and Special Tools List covering
Organizational Maintenance for this equipment (TM 9-2320-273-20P).
11-1
