TM 9-2320-273-20
SUSPENSION SYSTEM.
10-26. TORQUE RODS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
E. INSTALLATION (M916 THRU M920).
14.
15.
16.
Torque rods (5) and (8),
Aline mounting holes with
shim block sets (6).
those in cross member (7)
and cross member plates
(11).
Three bolts (9) and (10),
Install bolts through torque
flatwashers (12) and
rods (5) and (8), shim block
hex nuts (13).
sets (6), cross member plates
(11) and cross member (7) as
illustrated. Install washers
and nuts. Torque to 180 Ib-ft
(244 N·m).
Torque rods (5) and (8),
Aline mounting holes.
axle brackets (3).
17. Four bolts (4), flat
Install bolts through outer
washers (2), and hex
torque rod ends and fasten
nuts (1).
to axle brackets (3) with
washers (2) and nuts (1).
Torque to 180 Ib-ft
(142 N·m).
10-116
