TM 9-2320-273-20
STEERING MECHANISM.
10-21.3. STEERING GEAR POPPET ADJUSTMENT (Continued).
LOCATION/lTEM
ACTION
REMARKS
4. Rear poppet adjusting screw (35),
Adjust, lock and
If system pressure does
and locknut (36) (Continued).
tighten.
not relieve as the stop
makes contact, turn pop-
pet adjusting screw in.
Leek poppet adjusting
screw in this position by
tightening nut. Torque to
12-18 Ib-ft (16-23 N-m)
and remove spacer.
5. Right turn poppet adjusting
Repeat step 4 for the right
screw (37)
side poppet adjusting
screw.
6. Engine
Shut Off.
7. Power steering analyzer (33).
Remove.
8. Discharge line (31).
Install onto power
Cycle system and recheck
steering pump.
fluid level.
10-84.14 Change 3