TM 9-2320-273-20
WHEELS AND TIRES.
10-15. REAR WHEEL BEARINGS, SHAFTS, AND SEALS MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
C. PACKING AND INSTALLATION OF BEARINGS (Continued)
18. New bearing seal (2), two
Put in place over studs (13).
new flange gaskets (1), and
outer oil seal wiper (8).
19. Axle shaft (3).
Set in place.
20. Eight tapered spacers (4), star
Screw on. Tighten to 175 Ib-ft
washers (5), and nuts (6).
(237 N•m) with torque wrench.
Tighten in this order:
NOTE
Follow-on maintenance action required:
After road testing vehicle, check for oil leaks.
Change 2 10-59
